New BROM Exploit for MT6877 and MT6833 Announce UMTv2/UMTPro UltimateMTK v3.2 Supported CPU. Note :
- You need valid preloader for your device.
- When using TP for these, make sure use correct TP.
- Make sure to leave TP as soon as BROM detected.
- Make sure TP is not left shorted with GND to avoid Flash Detection issue.
Added in Models (and tested) :
- A79 5G (CPH2553)
- F27 Pro+ 5G (CPH2643)
- Preloader for these models are already included in software.
Updated JSON to Super Imager Conversion
- Added support for different format JSON
Other Minor Improvements Important
- Features introduced may work on other devices too, which are not litsed here.
- User needs to untick By Model checkbox to be able to select Platform manually.
- For manual work, just select Platform and DA.
- For new secured devices, use Disable Auth, and select Preloader.
- Rest operations will work same.
Important Notes:
- You can flash device with both BROM and Preloader mode
- If default DA does not work, use own DA in custom DA
- Force BROM may not work on new security, use Test Point instead
- When using Test Point, you must select Preloader in PL (not needed when flashing)
- If you need to connect device in Preloader mode, you must select PRELOADER in connection settings, otherwise software will try to Crash Preloader (may not work on new security devices)
Note : Some features are device/OS specific and may not work on all devices.
Please use UMT Card Manager to Update Card Counter / Firmware / Activate Add-on, available via Support Access.