Android Utility v108 Free
This software isn’t about MTK and META only anymore, decided to change the name to Android Utility v108.00.1264:07:06:2023 Changelog :
- added Android (Launch/Activate) Browser via MTP - [Qualcomm, MTK, UNISOC], (Xiaomi | Samsung | Vivo | Realme | Oneplus | OPPO | Tecno | Infinix), [All Android Devices].
- added Android (Launch/Activate) Browser via MTP by (VID and PID) [you can get your device Vendor-ID and Product-ID from device manager or using libusb-win32-devel-filter-1.2.6.0]
- Fixed Xiaomi Fastboot flasher (.bat - tar.gz - tar.tgz).
- This software was made for educational purposes only,
we allow the use of it under certain circumstances & it’s provided 'as-is',
without any express or implied warranty.
In no event will the authors be held liable for any damages arising from the use of this software,
please only use for legal servicing and maintenance of mobile phones,
and must not be used for illegal purposes. Website = androidutility.com
Android Utility v107.00.1248:06:06:2023 Changelog :
- added Samsung (Launch/Activate) Browser via MTP (No need to disable driver signature or install any drivers, without UsbDK or WinUSB), other brands such as VIVO and other Android devices which have the MTP port will be added in the next version.
- added Huawei HiSilicon partition manager (memory tool) from Fastboot mode (Read, Write, Format) partitions via Fastboot mode - [BL unlock required],
both (eMMC/UFS) memory types are supported for firmware backup procedure.
- added Xiaomi POCO M4 Pro 5G (Evergreen) Bootloader Unlock on (Evergo) ROM.
- added Samsung Galaxy A14 5G [SM-A146U] (Force/Exit) BootROM mode.
- This software was made for educational purposes only,
we allow the use of it under certain circumstances & it’s provided 'as-is',
without any express or implied warranty.
In no event will the authors be held liable for any damages arising from the use of this software,
please only use for legal servicing and maintenance of mobile phones,
and must not be used for illegal purposes. Website = androidutility.com
Android Utility V106:22.05.2023 Changelog :
- added Samsung Galaxy (A03) [SM-A035M] (all bits) (Latin America variant) one click dead boot repair via USB.
- added Samsung Galaxy (A03 Core) [SM-A032M] (all bits) (Latin America variant) one click dead boot repair via USB.
- added Samsung Galaxy (A03/A03 Core) [SM-A035F/SM-A035G/SM-A032F] (all bits - up to U3) (international) one click dead boot repair via USB (new method, BIT 3 included).
- Added Samsung (UniSoC) generic dead boot repair procedure via USB (BETA) for the following models,
(need to use (BL) from compatible firmware in oder to complete the repair process) :
- Samsung SM-T509 Galaxy Tab A7 10.4
- Samsung SM-X200 Galaxy Tab A8 2021
- Samsung SM-X205 Galaxy Tab A8 2021
- Samsung SM-X205C Galaxy Tab A8 2021
- Samsung SM-X205N Galaxy Tab A8 2021
* Some devices won't require eMMC re-partitioning, you can tick (Skip eMMC PMT rebuild) CheckBox to skip IC re-partitioning.
* Added (Huawei/Honor) HiSilicon temp BL unlock (Factory Fastboot) [BETA] for the following SoCs
- KIRIN620
- KIRIN650
- KIRIN655
- KIRIN658
- KIRIN659
- KIRIN710
- KIRIN910
- KIRIN920
- KIRIN925
- KIRIN930
- KIRIN935
- KIRIN950
- KIRIN955
- KIRIN960
- KIRIN970
- KIRIN980
* The rest of HiSilicon 5G SoCs such as (810, 985, 990) will be added into the premium tool later.
* Added (eMMC/UFS) dump extractor to raw images, dumps can be extracted with 7zip as well,
but UFS ones won’t be extracted (EFI block size is 4096, different from the previously used one in eMMC (512) - not updated to 7zip yet),
now you can easily extract (EASY JTAG, UFI) UFS dumps with our software.
to inject some partitions from the dumps example partitions could be useful to extract from dumps [OEMINFO, oppo_cusrom, nvram, nvdata] for any purposes.
- Fixed (Huawei/Honor) Qualcomm UFS firmware extractor (UPDATE.APP) to (rawprogram[x].xml),
previously the software creates an XML containing the (APPs) partitions only and skips some partitions which couldn't be found inside the factory package,
such as (bootfail_info, persist, oeminfo, modem NV partitions), this might cause (device verification failed issue), now the preducre is revised,
and the software extracts all partitions and creates a semi-factory XML according to GPT partitions from APP file).
- (Huawei/Honor) board firmware flashing revised and fixed.
** Now the software can extract (UPDATE.APP) to (XML files for QUALCOMM CPU and scatter for MTK CPU).
- Fixed Samsung flashing issues (Download mode).
Android Utility V105:10.05.2023 Changelog :
- added Xiaomi (.tgz/.gz) direct firmware update via Fatsboot mode (QCOM/MTK) - [BL unlock required], (to save time and space).
- fixed Xiaomi (.bat) firmware flashing via Fatsboot mode for newer devices.
- added Xiaomi Force flash for the unrecognized script format (corrupted [bat/sh]).
- added real time Fatsboot flashing LOG handler.
- internal ANDROID SDK Platform tools updated to (ADB/FB - v1.0.41 & SDK v34.0.1-9979309).
- fixed Huawei switch from (normal/FB) mode to upgrade mode function, firmware flash procedure updated as well.
- added A326U U8 force dead boot repair via USB (fully erased or wrongly flashed) [message me if you have any bricked A326U device).
added (OPPO/Realme) Fix [Download not completed Error Code 0x992566] message, for the follwoing models :
- Oppo F1s (A1601EX)
- Oppo A71 (CPH1717)
- Oppo F5 (CPH1723)
- Oppo A83 (CPH1729)
- Oppo F7 (CPH1819)
- Oppo F9 Pro (CPH1823)
- Oppo F7 Youth (CPH1859)
- Oppo A5s (AX5s) (CPH1909)
- Oppo F11 (CPH1911)
- Oppo A1K (CPH1923)
- Oppo F15 (CPH2001)
- Oppo A31 (CPH2015)
- Oppo Reno3 Pro (CPH2037)
- Oppo A12 (CPH2083)
- Oppo A93 (CPH2121)
- Oppo A15s (CPH2179)
- Oppo A54 (CPH2239)
- Oppo A16 (CPH2269)
- Oppo R15 (PACT00)
- Oppo A9 (PCAM10)
- Oppo A8 (PDBM00)
- Realme 3 (RMX1821)
- Realme C2 (RMX1941)
- Realme C3 (RMX2020)
- Realme 6i (RMX2040)
- Realme C11 (RMX2185)
- Realme C12 (RMX2189)
- Realme 8 (RMX3085)
- Realme C21 (RMX3201)
- This software was made for educational purposes only,
we allow the use of it under certain circumstances & it’s provided 'as-is',
without any express or implied warranty.
In no event will the authors be held liable for any damages arising from the use of this software,
please only use for legal servicing and maintenance of mobile phones,
and must not be used for illegal purposes. Website = androidutility.com
Android Utility V104:26.04.2023 Changelog :
- Added MTK one click disable DM-Verity corruption after Unlock Bootloader.
- Added Xiaomi (.bat) firmware flashing from Fatsboot mode (QCOM/MTK) - [BL unlock required].
Added Samsung MTK Dynamic Boot Repair procedure for the following models :
- SM-A125U1_ACG_A125U1UES1AUF2_fac
- SM-A125U1_PCT_A125U1UES2BUL1_fac
- SM-A125U1_PCT_A125U1UES3BVE1_fac
- SM-A125U_AIO_A125USQS3BVD6_fac
- SM-A125U_USC_A125USQU2BUL1_fac
- SM-A125U_VZW_A125USQS1AUEA_fac
- SM-A215W_BMC_A215WVLS2AUC1
- SM-A215W_BMC_A215WVLS4BVD1
- SM-A215W_BMC_A215WVLU1ATL3
- SM-A215W_BMC_A215WVLU3BUJ5
- SM-A225F_INS_A225FXXU3BVE1
- SM-A225F_PNG_A225FXXU1AUG4
- SM-A225F_SER_A225FXXU2AUH1
- SM-A225M_CDR_A225MUBS2AUJ2
- SM-A225M_COM_A225MUBS1AUG4
- SM-A225M_IUS_A225MUBU3BVE1
- SM-A226B_SER_A226BXXU3AVA4
- SM-A226B_XFA_A226BXXS4AVD6
- SM-A226BR_CHE_A226BRUBU1AUI4
- SM-A226BR_CHO_A226BRUBU3AVE1
- SM-A226BR_PGU_A226BRUBU2AVA4
- SM-A326BR_BRI_A326BRZHU1AUC9
- SM-A326BR_BRI_A326BRZHU2AUF4
- SM-A326BR_BRI_A326BRZHU3AUH4
- SM-A326BR_BRI_A326BRZHU4BVE8
- SM-A326U_CCT_A326USQU5AUI5
- SM-A326U_TMK_A326USQU1AUD4
- SM-A326U_TMK_A326USQU2AUD9
- SM-A326U_TMK_A326USQU3AUE7
- SM-A326U_TMK_A326USQU4AUH3
- SM-A326U_TMK_A326USQU6AUJ4
- SM-A326U_TMK_A326USQU7BVE5
- SM-A326W_BMC_A326WVLU1AUCC
- SM-A326W_BMC_A326WVLU3AUF1
- SM-A326W_BMC_A326WVLU4AUH5
- SM-A326W_BMC_A326WVLU6AUK2
- SM-A326W_BMC_A326WVLU7BVE5
- SM-A326B_GLB_A326BXXU1AUC1
- SM-A326B_GLB_A326BXXU2AUF3
- SM-A326B_GLB_A326BXXU3AUH4
- SM-A326B_GLB_A326BXXU4BVE7
- SM-E426B_INS_E426BXXU1AUL1
- SM-E426B_INS_E426BXXU2AVD1
- SM-S215DL_TFA_S215DLUDS3AUC1
- SM-S215DL_TFA_S215DLUDU1ATG6
- SM-S215DL_TFA_S215DLUDU2ATL3
- SM-S215DL_TFA_S215DLUDU4AUI1
- SM-S215DL_TFA_S215DLUDU5BUJ4
- SM-S215DL_TFA_S215DLUDU6BVB3
- SM-S326DL_TFA_S326DLUDS3AUJ1
- SM-S326DL_TFA_S326DLUDU1AUD1
- SM-S326DL_TFA_S326DLUDU2AUG4
- SM-A125F_VFJ_A125FXXS2BVE3_fac
- SM-A136U1_ACG_A136U1UES1AVD2
- SM-A315F_INS_A315FXXU1DVD8
- SM-A315G_XME_A315GDXU1DVE2
- SM-A315N_KOO_A315NKSU1DVE1
- SM-A415F_SER_A415FXXU1DVDB
Unpack (Samsung.MTK.Dyn.Boot.Repair.rar),
the file contains (scatter+preloader for each model of the list of devices above) -
Convert scatter to PGPT using AndroidUtility Tool -
Write PGPT.bin as (USER Section) & PRELOADER as (Boot Section) -
for eMMC types, for UFS devices use PGPT.bin from SAMGPT folder.
Android Utility V103:11.04.2023 :
- added Samsung flashing [download mode] (single & multiple TAR ROMs, ordinary raw images + lz4 images flashing is supported - stable speed with prefect ODIN protocol implantation).
- added MediaTek disable (Orange state) message.
- added MediaTek re-enable (Orange state) message.
- added Xiaomi MediaTek disable OTA updates.
- added Xiaomi MediaTek re-enable OTA updates.
- added change Android boot slot (A/B) from fastboot mode.
- added ADB reboot to recovery mode.
- added Redmi Note (11/11T) 5G (evergo) one click Bootloader (Unlock/Relock) (All Variants) (MIUI12, MIUI13, MIUI14) - BETA.
(evergreen) will be added in the upcoming version, and we'll re-verify (evergo) function as well.
- Improved Samsung A03 Core (A035F & A032F) dead boot repair procedure via USB.
- This software was made for educational purposes only,
we allow the use of it under certain circumstances & it’s provided 'as-is',
without any express or implied warranty.
In no event will the authors be held liable for any damages arising from the use of this software,
please only use for legal servicing and maintenance of mobile phones,
and must not be used for illegal purposes. Website = androidutility.com
- USE it at your own risk. Archive’s Password = cccc , credit to Mofadal El-Tayeb
Android Utility V101:01.04.2023 :
- Added (Huawei/Honor) [MTK & Hisilicon & Qualcomm] Board Firmware flash in fastboot mode (BL unlock required).
- Added Samsung Galaxy (Grand/J2) prime+ [G532F] one click Dead boot repair via USB [BROM & PRELOADER].
- Fixed (Xiaomi 11i 5G / Note 11 Pro+ 5G - [Pissarro] - [CN, EU]), bricked after Unlock BL, you can re-Lock BL now to restore the device to original status. (Flash Global FW any MIUI VER) and repeat Unlock BL process.
- This software was made for educational purposes only,
we allow the use of it under certain circumstances & it’s provided 'as-is',
without any express or implied warranty.
In no event will the authors be held liable for any damages arising from the use of this software,
please only use for legal servicing and maintenance of mobile phones,
and must not be used for illegal purposes.
- USE it at your own risk. Website = https://androidutility.com * File Password = bbbb
Android Utility V100:26.03.2023 Added MTK Read Full extended device INFO in BootROM mode.
- Added (Huawei/Honor) [MTK & Hisilicon & Qualcomm] UPDATE.APP flash in fastboot mode (BASE + CUST + PRELOAD) + GPT and region customization update (no need to flash via Dload or SD after) - BL unlock required.
- added and optimized MTK eMMC and UFS health check (LIFE CYCLE) in BootROM mode.
- added new option to disable Realme Wireless Test Assistant.
- added MTK Read & Write BOOT section (BOOT1, LU0) in BROM mode.
- added MTK Read & Write USER section (EMMC_USER, LU2) in BROM mode.
- MTK USER section Readback decreased to [16 MB], to save calibration data [this feature could help to recover dead Samsung devices after GPT corruption (A226b, A125U, A315F, A136U, A326U, etc.)].
- Added decode android gesture.key from local file (5&4&3).
- Improved Xiaomi (pissarro/agate/cactus/cereus) Bootloader unlock and relock operations (safely).
- a Lot of internal fixes and improvements were applied to SW base.
- USE it at your own risk. Archive’s Password = aaaa
MediaTek Bypass Auth Tool MTK META Utility V95:20.03.2023 :
Added Xiaomi Redmi Note 11 Pro+ 5G (pissarro) one click Bootloader (Unlock/Relock) (All Variants)
(MIUI12, MIUI13, MIUI14).
- added (Spreadtrum/UNISOC) Factory Reset via Diag mode (one click - Auto switch + RESET).
- added (Spreadtrum/UNISOC) Read INFO via Diag mode.
- added Samsung Galaxy A22 5G [A226B] BIT[5] one click Dead boot repair via USB, flash (A226BXXU5CWB6) after boot repair.
- added G532F Force BootROM + Auto Disable Auth (PRELOADER + BROM).
- a Lot of internal fixes and improvements applied to Samsung boot repair procedure.
- This software was made for educational purposes only,
MTK META Utility V93:09.03.2023 Added Xiaomi 11T (agate) Unlock Bootloader (All Variants) (MIUI12, MIUI13, MIUI14). - Added new OPPO META Reset option to support :
* Oppo F5 (CPH1723, CPH1727, CHP1723, CHP1727).
* Oppo F5 Youth (CPH1725).
* Oppo A83 Pro (MT6763T).
* Oppo A1 (MT6763T).
* Oppo A83 (CPH1729, CPH1827).
* Oppo A73 (CPH2099).
* Oppo A79 (PBBM00).
- Added new boot repair function for (A037F B1 & B2) - In case if BROM mode forced via (PGPT method), and the device have [SEC CTRL STATUS (0)] flag, the device should be recognized by PC,
at least (preloader port visible), or PMIC detects USB cable.
- This version packed without my personal LOG folder to save time while extraction.
- META Protocol updated (overall optimizations & improvements).
MTK META Utility V92:28.02.2023 Added (Huawei/Honor) Qualcomm extract and convert UPDATE.APP to GPT and RawProgram XML [single and multiple] (with UFS support), also it supports multiple UPDATE packages extraction (BASE + CUST + PRELOAD).
- Our software extracts the packages same as factory IMAGES, after flash it with (USB & JTAG), you don't have to flash the device again with fastboot or upgrade mode (the device will work normally with customization installed), this feature useful to recover dead Huawei and Honor devices after flash wrong firmware (LDN,DUB,LND,etc), this feature exists in some tools such as UMT & EMMC Dongle, but it doesn’t fully extract the update package and doesn’t extract the customization package or UFS update, our method is generic now and support all update types.
- Added Qualcomm OnePlus (.ops) Firmware extraction to RawProgram XML and factory images.
- Added MTK Helio G96 MT6781 preloader parser [preloader_k6781v1_64].
- Added MTK Helio G99 MT6789 preloader parser [preloader_k6789v1_64]
- Added extract Huawei MTK Update.app to scatter.
- Fixed Samsung ROM to scatter converter (STATUS_TOO_LARGE), And missing (LK) or (BL) partitions due to previous bug (the software doesn't extract IMG_verified.lz4) now fixed, please re-extract all the Samsung ROMs which you have already extracted.
- Added Rebuild USERDATA partition via META Mode.
- Fixed and tested VIVO Y30 and VIVO Y1S META wipe.
- Fixed MTK disable auth issue.
Supported (Huawei/Honor) UFS devices for FW extraction :
Huawei Nova_8I [NEN-XXX]
Huawei Nova_9 [NAN-XXX]
Huawei Nova_9SE [JLN-XXX]
Huawei P50 [ABR-XXX]
Huawei P50_Pocket [BAL-XXX]
Huawei P50_Pro [JAD-XXX]
Honor 50_Lite [NTN_XXX]
Honor Magic 4 [LGE-XXX]
Honor Magic V [MGI-XXX]
Honor X7 [CMA-XXX]
Honor X8 [TFY-XXX]
- OnePlus OPS firmware decryption credit to (Bjoern Kerler), i have ported the decryptor to QT C++, if any developer needs the ported C++ source code contact me.
MTK META Utility V90:21.02.2023 Added Samsung A03S [A037F U2]
Unlock Bootloader via USB (one click using preloader mode)
- Added Samsung A037U BIT[3] Dead boot repair via USB.
- Added Samsung A326U BIT[8] Dead boot repair via USB.
- Added Samsung A037F BIT[2] Dead boot repair via USB.
- Recommended version to flash after repair boot :
- SM-A037USQS3BWA3.
- SM-A326USQU8CWB4.
- SM-A037FXXU2CVK7.
- Fixed VIVO (Y1S-Y30) META Reset.
- Restored Samsung (Force/Exit) BootROM mode features.
- Fixed Samsung A037F (SEC_CTRL_STATUS [0/2]) Bootloader Unlock.
- Flash Combination file via SPFT (without vbmeta, cache, super, userdata), then Unlock BL.
- A037F U2 combination ROM :
- This software was made for educational purposes only & we allow the use of it under certain circumstances & it’s provided 'as-is', without any express or implied warranty.
MTK META Utility V89:19.02.2023 :
- Added Samsung A03S [A037F U2] Unlock Bootloader via USB (one click using preloader mode),
BootROM disabled by Efuse(MTK_SEC_CTL_FUSES).
- it works under any SAM SEC level :
- (SEC CTRL STATUS (0)).
- (SEC CTRL STATUS (2)).
- KG (Locked/Broken) [00/01].
- Upgrade your device to this version (A037FXXU2CVK7), before performing the unlock operation.
- we will add more devices soon to support Bootloader Unlock via preloader mode such as (A12, A21, etc.).
- Bootloader unlock feature allow you to install [custom ROMs/modified images] via (Fastboot/Preloader) mode,
we might add (Flash TAR ROM option via Preloader mode for devices with SEC CTRL STATUS (0/2) flag).
- to complete Bootloader unlock operation, you will need to wipe data from recovery mode.
- Samsung MTK devices such as (A03s) are now supported for META mode operations,
(Read (DevInfo/EXT_CSD) - [R/W/F] partitions, etc.),
(userdebug required, to enable USERDEBUG mode on A03S,
press Unlock Bootloader button and disconnect the device,
and abort the operation before the device enter Fastboot mode).
- we upload (DEBUG PRL/lk-bootloader/trustzone), to complete the Bl Unlock operation,
then we restore factory (sec files/Bl handlers) later in order to enable normal end USER build mode,
(all operations are automated for ordinary user, it’s just one click operation).
- If your device doesn’t enter fastboot mode in middle of the operating download this DEBUG USB RECOVERY package :
- Flash all files from it except (super/cache/userdata) then repeat the unlock operation.
- added Samsung Read full Device Info from MTP mode.
- fixed (software crashes while extracting OFP files with no multi super regions).
- For OZIP packages, you can extract it easily with (WRar/7Zip).
- This software was made for educational purposes only & we allow the use of it under certain circumstances & it’s provided 'as-is', without any express or implied warranty.
In no event will the authors be held liable for any damages arising from the use of this software,
MTK META Utility V88:16.02.2023 :
Added MTK Read [eMMC/UFS] dump via USB (512 MB) [one click]
- Added MTK Read [eMMC/UFS] dump via USB (512 MB) [one click].
- Added [Spreadtrum/UniSoC] .PAC firmware extract.
- Fixed (OPPO/Realme) [MTK/Qualcomm] ofp extraction procedure.
- Auto combine (repack) super images with multiple regions to save time and space,
the software will auto-merge the first region only from CSV MAP… normally the first region would be (EU).
- Fixed Android Utils tab (some items were hidden in small screens (laptops)) now fixed.
- This software was made for educational purposes only & we allow the use of it under certain circumstances & it’s provided 'as-is', without any express or implied warranty.
In no event will the authors be held liable for any damages arising from the use of this software,
- USE it at your own risk. Archive’s Password = mtk_meta_utility, credit to Mofadal El-Tayeb
MTK META Utility V85:08.02.2023 new Features & Enhancements
Added Huawei USB Firmware update (Dload/Upgrade mode), with super speed (20-38 MB/s).
- HiSilicon & Qualcomm & MTK and all SoC types are supported,
both old & new devices are supported (EMUI 3.x to EMUI 10.x & Magic 3.x).
- Support all Huawei update types ([single APP] & [APP+CUST] & [APP+CUST+PRELOAD] & [APP+CUST+PRELOAD+PTABLES]).
- Load all sub update files (6 or less) with one click (smart firmware loader).
- 2 protocols were implemented (Fast Download protocol by default + old algorithm (a little bit slow))..
- Huawei MTK devices are now supported for META mode operation ([Board/Debug] SW mode required).
- Added Fast-boot Flash partition option (BL unlocked [kernel/debug] mode required).
- Fixed Huawei switch from normal mode to upgrade mode.
- Improved Huawei switch from Fastboot mode to upgrade mode procedure.
- Spreadtrum/UNISOC .PAC flashing option optimized.
- MTK IC health check operation now support UFS IC's (auto-detection),
we have implemented deep check functions to detect the real eMMC/UFS health info by DA mode,
(it works even with Dead DRAM now).
- This software was made for educational purposes only.
- We allow the use of this software under certain circumstances.
- This software is provided 'as-is', without any express or implied warranty.
In no event will the authors be held liable for any damages arising from the use of this software,
MTK META Utility V83:03.02.2023 New Features & Enhancements :
Added MTK write [eMMC/UFS] Dump (userarea.bin, LUN2) via USB, to help recover dead devices
- you can use this option to repair dead Samsung A326U BIT8.
- but take care of (calibration/NV) partitions (make backup first then restore later).
- our aim is to simplify the solutions (one click), and make it easy to understand with a stable easy user interface.
- This software was made for educational purposes only.
- We allow the use of this software under certain circumstances.
- This software is provided 'as-is', without any express or implied warranty.
MTK META Utility V82:02.02.2023 :
* New Features & Enhancements :
- Fixed (Spreadtrum/UNISoC) firmware (.pac) flashing via BootROM mode (SPRD U2S Diag).
- R/W operations moved to pure Asynchronous IO mode.
- Now you can get the maximum possible Dl speed for flashing.
- Restored some of the removed functions.
- Added Device Manager button.
- Added Task Manager button.
- Added Reboot PC button.
- Added ADB reboot to Fastboot.
- Added ADB reboot to EDL (Bootloader unlocked or [EngROM/Board software mode]) & for the devices with Android V5.0 and lower (No G-OEM).
$ This software was made for educational purposes only.
& We allow the use of this software under certain circumstances.
- Therefore, this software is provided 'as-is', without any express or implied warranty.
MTK META Utility V80:24.01.2023 New Features & Enhancements :
Added Spreadtrum UNISoC Flash PAC file via BootROM mode (SPRD U2S Diag).
- Restored some of the removed functions.
- Fixed VIVO F-Reset via META mode.
- Changed the Comport Protocol to Asynchronous Serial I/O, to work smoothly with X-MODEM.
- Async IO gives us the maximum (Reaback/Download) & all transmissions speed.
- A lot of internal (fixes/improvements/optimizations) were implemented for META Mode operations (AP/MD).
- Moved the whole SW base to QT_API, and avoiding the use of native C/C++ libs.
- We have reversed the SPRD Download partition entries,
due to known issue which is COMBO BootLoader (PRELOADER - eMMC and UFS),
there were many devices using 2 controllers for one SoC,
in case if the device uses eMMC memory, and It could be the case,
if we downloaded UFS SPPLDR to eMMC device,
it won't be detected by PC & power on,
reversed to download SPLLDR eMMC after the UFS LDR for (spl/u-boot loader).
The issue also persists inside SPD Research Tool,
so here safe way to flash Samsung PAC ROMs.
- I have seen some posts at GSM forum about bricked A03 devices fully bricked / fastboot mode, guide them please, with our tool, they can easily fix thier devices with a single click.
A035F & A032F Factory USB debug recovery PAC files :
This software was made for educational purposes only.
& We allow the use of this software under certain circumstances.
- Therefore, this software is provided 'as-is', without any express or implied warranty.
In no event will the authors be held liable for any damages arising from the use of this software,
please only use for legal servicing and maintenance of mobile phones,
and must not be used for illegal purposes.
- USE it at your own risk. Archive’s Password = mtk_meta_utility, credit to Mofadal El-Tayeb
MTK META Utility V78:18.01.2023 New (Features/Enhancements/Improvements) :
Due to the requests of many users suggested restoring Samsung Force BootROM (Crash By PGPT) back,
we have restored it to support A136U.
- Added Samsung Force Brom by PGPT for :
- Samsung Galaxy A13 5G :
(SM-A136U, SM-A136U1, SM-A136W, SM-A136B)
- Samsung Galaxy M13 5G :
(SM-M136B, SM-M136B/DS)
- Samsung Galaxy F42 5G :
(SM-E426B, SM-E426B/DS)
- Samsung Galaxy A31 :
(SM-A315F, SM-A315F/DS, SM-A315G/DS, SM-A315G, SM-A315N)
- To exit BRom after using PGPT method,
you need good PGPT to download as UserSection from BRom tab,
GPT backups can be found inside (MTKMETAUtility\\SAMGPT) directory.
- Added Device manager button.
* Please don't try this function with :
- Devices with (Locked/Active).
- Devices with [SEC CTRL STATUS (0/2)].
- Devices from TracFone WS carrier (TFN).
* Bug Fixes :
- Fixed (STATUS_DA_HASH_MISMATCH) while exiting BRom for VIVO devices - or BootSection download function in general.
- Fixed (Chip not supported) while exiting Brom for VIVO V23 5G (VIVO MT68xx). After force BootROM with other tools.
- Fixed progress bar alignment.
- Regarding (A032M/A035M) - A03 Latin America versions :
We haven't succeeded yet for dead boot repair procedure via USB,
reason is (our developer needs a test device in his hands,
we couldn't find the needed test device in his area,
if anyone can ship it to him, he will complete the function for [M-LA] versions).
We have tried to use (SPLLdr/U-Boot/LK) as FLDs, but when we run it,
it turns to real time execution,
and the device disconnects immediately and enter Fast-boot mode,
after execute the FDL in case if LK is alive.
However, you can service [M/LA] version and revive it,
using Pandora's Box software, until we find a stable one click solution.
Pandora's Box uses (generic/autoloader/no-auth) for that SoC.
For 'F' version, use FDL's from USB recovery image from Samsung factory,
which isn't compatible with 'M' builds.
- We have implemented a basic dead boot repair support for (A035G),
it seems to have the same (SoC/D-RAM) config as 'F' version,
please let us know if it's working or not, if it worked,
flash A035GXXS2BVL6 after boot repair operation.
This software was made for educational purposes only.
& We allow the use of this software under certain circumstances.
- Therefore, this software is provided 'as-is', without any express or implied warranty.
In no event will the authors be held liable for any damages arising from the use of this software,
please only use for legal servicing and maintenance of mobile phones,
and must not be used for illegal purposes.
- USE it at your own risk. Archive’s Password = mtk_meta_utility, credit to Mofadal El-Tayeb
MTK META Utility V75 Release date - 29.12.2022.
New Features and Enhancements :
- Added Samsung Galaxy A03 Core SM-A032F (BIT2) dead boot repair via (USB),
no need (JTAG/ISP/DEBUG PAC), just one click.
- Recommended version to flash after repair (A032FXXS2AVJ2).
- Unlock and Relock Bootloader options activated.
- Samsung Galaxy A035M coming soon.
This software was made for educational purposes only.
- We allow the use of this software under certain circumstances.
- Therefore, this software is provided 'as-is', without any express or implied warranty.
In no event will the authors be held liable for any damages arising from the use of this software,
please only use for legal servicing and maintenance of mobile phones,
and must not be used for illegal purposes.
- USE it at your own risk. Archive’s Password = mtk_meta_utility, credit to Mofadal El-Tayeb
MTK META Utility V72 Release date 23.12.2022.
* New Features and Enhancements :
- Added Samsung Galaxy A03 SM-A035F (BIT2) dead boot repair via (USB),
no need (JTAG/ISP/DEBUG PAC), just one click.
- I have seen a lot of people struggling to recover their bricked Samsung UniSoC devices (Especially Samsung A035F),
after flash (wrong/low-ver/downgrade/incompatible) ROM in Download Mode or (Debug/Eng) ROM (combination.PAC) in BRom mode (SPRD U2S Diag),
the device becomes completely dead, or stuck at FastBoot mode.
- My current repair method can recover the device from the both conditions.
- Just connect the device in (SPRD/BRom) mode and perform the operation.
- The repair operation is safe and don't affect on (NV/MODEM/calibration) data.
- Recommended version to flash after repair (A035FXXU2BVI8).
- Flash (U2/X2) (Debug/FAC) ROM or update your device to BIT2 Rev, if you want to try the repair procedure.
- DEBUG_USB_RECOVERY PAC files available everywhere, you can download from (Infinity/Pandora) support.
and flash with any SPD tool. After FW update, the device will stuck at Fastboot mode,
in case if you flash with any tool, make sure to un-tick (SPLLoaderUFS) partition,
you will need to re-connect in BRom mode, and recover with our software.
- After repair boot with our software, just flash the device with ODIN using Samsung factory firmware, recommended version to flash after repair (A035FXXU2BVI8) or higher.
- After flash Debug Binaries (Eng/Dev ROM) in BootROM mode,
you can Unlock & Relock the Bootloader easily via Fatsboot cmd,
using the following commands in Fatsboot mode :
- fastboot.exe oem unlock.
- fastboot.exe flashing lock.
Bug Fixes :
- Random crashes while (searching/connection) to COM ports.
- Some (GUI/Internal) optimizations were added.
Phased out (G-Lock disable tasks) :
- For a legal issues, we don't do these operations anymore.
- my main aim of creating this software is to help people (recover/fix) their (&OWN&) devices legally only.
1st mission accomplished, i'll work this week on the second task (Honor X6).
We allow the use of this software under certain circumstances.
- Therefore, this software is provided 'as-is', without any express or implied warranty.
In no event will the authors be held liable for any damages arising from the use of this software,
please only use for legal servicing and maintenance of mobile phones, and must not be used for illegal purposes.
MTK META Utility V70 Release date11.11.2022 New Features and Enhancements :
- Added Patch Xiaomi Qualcomm Firmware to Disable MI Cloud Lock.
- The software will create a backup from the original file, before patch process, (can be restored in case if anything gone wrong after the patch process),
after patch, you will need to flash (MODEM & PERSIST) partitions,
you can't add a new account (no access to MI ACC server).
- The patch can be removed by firmware update (USB/OTA), and will not be removed with ordinary soft-reset, you will need to select (MODEM - NON-HLOS.bin) file for the patch.
This feature already exists and available to operate with many tools (but doing it manually is FUN).
- Application GUI updated.
* Phased out :
- VIVO New Sec Read Info => [We have analyzed, reviewed the risks of this operation for VIVO MTK devices with UFS based chipsets (This option can reset the device to BootROM mode, despite the fuses and test-point disable, but it will also remove the calibration data such as IMEI/Fingerprint data), the option is disabled temporally.
However, you were still able to use the previous versions to access this feature].
- We allow the use of this software under certain circumstances, Therefore.
This software is provided 'as-is', without any express or implied warranty.
In no event will the authors be held liable for any damages arising from the use of this software, please only use for legal servicing and maintenance of mobile phones, and must not be used for illegal purposes.
- USE it at your own risk. Archive’s Password = mtk_meta_utility, credit to Mofadal El-Tayeb
MTK META Utility V66 :
- Added Exit BRom mode for (Samsung Galaxy A13 5G), if the device stuck at BootROM mode due to corrupted PGPT table - Enter BRom with (MTK META Utility V42), A13 5G uses MediaTek MT6833 Dimensity 700 CPU :
- SM-A136U
- SM-A136U1
- SM-A136W
* To Exit MTK Port (Write EXT_PATH/SAMGPT/A136U_pgpt.bin as USER_SECTION) device will boot to system normally.
- Added Convert Ext4 Sparse (compressed) files to Non-sparse files, now you can modify the sparse files content after convert to ordinary ext4 (for now applied to system level ext4) super and METAData (compressed) will be added later.
However, for now you will be able to modify (Write/Delete) Non-compressed super images (for system and other you can convert then modify).
- Removed the specified (.img & .bin) extension file loader, now you can select any ext4 files without extension check.
- Ext4 file preview option revised & optimized (the software will rename the temp file with the original extension) - In order to be able to view files with the default Windows system APP.
- This software is provided 'as-is', without any express or implied warranty.
In no event will the authors be held liable for any damages arising from the use of this software, please only use for legal servicing and maintenance of mobile phones, and must not be used for illegal purposes.
- USE it at your own risk. Archive’s Password = mtk_meta_utility, credit to Mofadal El-Tayeb
MTK META Utility V65 :
Most requested feature for Windows :
since windows is missing Ext4 FS driver, and only support mount as Read-only FS for Ext4 partitions.
Here, Ext4 File system explorer (Read/Write/Delete) access with SUPER IMG (META-Data) support :
* Supported features :
- List Ext4 directories (sub-partitions).
- Preview Ext4 file content.
- Read Ext4 File content into local file.
- Write/Replace File content from local file.
- Delete sub Ext4 file completely (safe).
- Example Ext4 partitions which could be directly modified (super, system, vendor, product, protect partitions, opporeserve2, EFS, SEC_EFS, NV-DATA)
- You can modify protect partitions to legally disable carrier network lock.
- You can modify (build.prop) content to set virtual properties from your choose such as (Android versions, build number, etc.).
- You can disable some system apps (Apks) to temporary disable (KG/Screen) locks.
- For sparse images only supported (ls) operation, you can convert to non-sparse images using (simg2img) binary, then reload with the explorer.
- The Explorer for now is BETA based on lwext4 engine, we’ll improve in the upcoming versions and we will add new features such as (rename, etc.).
- The software doesn't support auto backup before modifying the file, so please make a backup from the local file before (Replace/Delete) any content.
- Thanks to Ray Marm Aung for help to setup lwext4 engine implementation.
- This software is provided 'as-is', without any express or implied warranty.
In no event will the authors be held liable for any damages arising from the use of this software, please only use for legal servicing and maintenance of mobile phones, and must not be used for illegal purposes.
MTK META Utility V63 :
- Added Samsung old devices (2016 - 2018) Switch preloader mode to BRom mode without test-point (without corrupt PL as well) such as :
* Samsung Galaxy Grand Prime + (SM-G532F) - MT6737T
* Samsung Galaxy J7+ (SM-C710F/DS) - MT6757
* Samsung Galaxy J7 Max (G615F/DS) - MT6757
* Samsung Galaxy On Max (G615FU) - MT6757
* Samsung Galaxy J2 Ace (SM-G532G) - MT6737T
* Samsung Galaxy J2 Prime (SM-G532M) - MT6737T
* Samsung Galaxy C7 2017 (SM-C7000) - MT6757
- No Need to exit BRom, because the device just will enter BRom mode normally same as A10s (no soft-brick).
- The used method is pretty old, called (Platform reset to emergency mode using PWR CTRL registers).
- The method might work on older chipsets (no vendor specified) such as (MT65xx, MT673x, MT675x).
- I'll share a new post later to explain how they have (MediaTek) disabled this kind of exploiting (PWR CTRL REGS) these days on VIVO MT6765 devices.
- This software is provided 'as-is', without any express or implied warranty.
In no event will the authors be held liable for any damages arising from the use of this software, please only use for legal servicing and maintenance of mobile phones, and must not be used for illegal purposes.
MTK META Utility V61 :
- Added LG DKZ directly (Extract/Decrypt) to raw images.
Supported KDZ formats and types:
- LGE KDZ v1 - v2 - v3 (MediaTek & Qualcomm).
- Standard compressed Z-Library (zlib).
- Z-Standard compression (zstd) fast lossless compression algorithm (other tools don't handle this type of compression very well).
- Extraction will now be standard raw image,
scattered and file (merge/combination) sparse creation (system/vendor/product/super),
some pieces, will be added in version.
- However, you can still do it manually,
Convert pgpt. I will deploy and add items to the scattered file &
Extract the IMG preloader from the extracted raw preloader &
and use ext4_tools to (merge/merge) the extra chunks.
Some of the files tested:
- LG K51 (K500MM10f_00_MPS_US_OP_0610.kdz)
LG K61 (Q630HA20a_00_OP_SCA_OP_1229 kdz)
- LG Pen 6 (Q730MM10l_00_MPS_US_OP_0908.kdz)
- Added (Extract/Split) IMG preloader from BOOT_REGION and converted to flash-able preloader,
eMMC & UFS Preloader supported types (EMMC_BOOT & UFS_BOOT, COMBO_BOOT)
- Tell me any (low level) tasks that will help if we add in future versions, we welcome any (requests & recommendations) about hardware package extraction, you have any kind of file formats that have been developed and use d hp service only, let's know.
- SoftwareGUI Boost & fix compatible with almost all screens
- Developers can request source code (QT/C++) for extraction algorithm.
- This software is provided 'as is', without express or implied warranties.
The author will not be responsible for any damage arising from the use of this software, and it can only be used for legal services and mobile phone maintenance, and may not be used for illegal purposes.
- USE it at your own risk. Archive’s Password = mtk_meta_utility, credit to Mofadal El-Tayeb
For Samsung MTK devices with chipset (MT6739/W/WW), which fail to exit from B-Rom with (MTK META Utility) such as:
- Samsung Galaxy A02 (SM-A022F, SM-A022F/DS, SM-A022M, SM-A022M/DS, SM-A022G, SM-A022G/DS).
- Samsung Galaxy M02 (SM-M022F, SM-M022F/DS, SM-M022G, SM-M022G/DS).
- Samsung Galaxy A01 Core (SM-A013F, SM-A013F/DS, SM-A013G, SM-A013G/DS, SM-A013M).
Samsung Galaxy M01 Core (SM-M013F, SM-M013F/DS)
- The solution is to download the BIT Revision compliant firmware and Extract the same as (MTK META Utility), then go to the B-Rom tab and select (Write BOOT_SECTION - LUN0/BOOT1) and select the extracted preloader (the big one with 4 MB), DONE.
- Do not try to flash with other tools, it may damage the area (P-GPT) when flashing and fail to make Samsung specifically compatible (P/S-GPT).
- In case if this happens and fails to service with other tools, just disable auth and flash with SPFT only (PRELOADER & LK & EFUSE) of revoked firmware.
The reason is that this chipset (MT6739/MT6757) is quite old (controller chip - quad-core processor based on Cortex-A53 architecture) and it doesn't support dump command eMMC_CID, so it doesn't allow us to find compatible auto preloader Mathematically.
MTK META Utility V60 :
Added Samsung A32 5G USA (A326U) fix bricked (stuck in Boot-ROM port after service or trying to unlock with other tool & (broken/broken) BOOT_REGON (LU0) - USER_PARTITION (P-GPT)).
- 3 files stored in software resources will be used for your device service (LU0 & P-GPT & PIT) to upload to your phone.
- This software is provided 'as is', without express or implied warranties.
The author will not be responsible for any damage arising from the use of this software, and it can only be used for legal services and mobile phone maintenance, and may not be used for illegal purposes.
- USE it at your own risk. Archive’s Password = mtk_meta_utility, credit to Mofadal El-Tayeb
MTK META Utility V56 :
- Added Disable/Remove Demo mode for VIVO devices in preloader mode.
- Including new security >= (01.08.2021) No BRom no brick risk for (MT6771 & MT6765) SoCs :
- V11i,X21i,Z3i,Y97.- Y01,Y02s,Y1s,Y3s 2021,Y10,Y15a,Y15s,Y12s,Y16,Y17,Y20 2021,Y21,Y30,Y30 SE,Y81.
- This software is provided 'as-is', without any express or implied warranty.
In no event will the authors be held liable for any damages arising from the use of this software.
- USE it at your own risk. Archive’s Password = mtk_meta_utility, credit to Mofadal El-Tayeb
Peringatan : - JANGAN gunakan opsi (VIVO NewSEC Read Info) di MTK META Utility dengan perangkat VIVO MTK yang menggunakan chipset Dimensity 5G seperti :(MT6833,MT6877T,MT6891Z,MT6893,MT6895), seperti yang disebutkan dalam versi alat sebelumnya, opsi ini dapat digunakan untuk (M T6765,MT6768,MT67711) saja.
- Jika Anda menggunakan opsi ini dengan SoCs baru, perangkat akan masuk mode BootROM, bahkan pada patch keamanan terbaru (01.09.2022), tetapi berisiko (soft-bata).
- Tampaknya ada kerentanan yang disebabkan oleh menggunakan perintah kustom (Readback) yang digunakan untuk mengunggah (PRELOADER/PGPT), mungkin overflow atau pengecualian SoC, saya tidak tahu apa penyebabnya.
- Jika sudah terjadi dan menggunakan opsi ini dan perangkat Anda masuk ke mode BRom, Anda akan membutuhkan penuh (UFS Dump) dari (USER_PARTITION) untuk di-flash tanpa pre-loader, biarkan pra-loader berkedip setelah memastikan unduhan (USER_PARTITION) berhasil, karena jika Anda flash pre-loader terlebih dahulu dan dengan alasan apapun (USER_PARTITION) Flashing tidak selesai perangkat akan terus me-reboot dalam mode preloader dan Anda tidak dapat menonaktifkan auth atau memaksa BRom dan pengecualian tidak akan terjadi lagi jika Anda mencoba untuk ReadInfo.
- Jika metode di atas tidak berfungsi, Anda hanya dapat mem-flash perangkat dengan (AFTOOL) atau alat apa pun yang menggunakan akses server VIVO resmi.
Important Informations about VIVO devices with MediaTek chipsets :
- VIVO Fused and Patched BootROM again with new security patch (01.08.2022)
- Even (MT6765 & MT6771 & MT6785) SoCs were affected by the custom vendor fixes.
- The OTA update just received 2 days ago.
- Our previous META Utility tool update was prepared a week ago (so please Do NOT try to enter BRom mode if the security is (01.08.2022) or newer, you can check the security patch using our tool (MTK META Utility) with (VIVO New Sec ReadInfo) button to ensure the device updated to the latest security patch or not.
* The security patch changes :
- BRom is completely disabled by fusing.
- Hardware test point is blocked.
- META Mode Locked Down as well.
- AT handler is patched and now it requires authorization.
- Preloader op-code completely changed to fuse the CPU.
- If you (Erased/Modified) the preloader, you can’t fix the device anymore via USB you need to use (JTAG/ISP) and write BOOT1 area in order to get your device working again.
- Currently confirmed only one device with MT6765 and (DEMO mode) enabled, but the patch seems to be generic.
- Preloader mode is still safe to work with, unless it you played around BOOT region’s.
- Means the safest way to deal with VIVO devices now is to use TFM Tool in preloader mode and not try to enable BRom port.
MTK META Utility V55 :
- I have seen a lot of people struggling to jump into BootROM mode for VIVO devices with new security (mt6765, mt6771), so I made a simple solution to Enter/Exit BootROM mode for these devices.
- This feature already implemented in some tools, but not the correct way, they just added the DA file.
- With my method you don’t need to search for preloader from old firmware to enable BRom port or preloader from new firmware package to exit BRom, all operations are automated as usual, to help people operate this kind of tasks as fast as possible
,to exit BRom you need to select the Main preloader file with big size (4MB)
- Added Write PGPT option in BRom mode to fix partition table corruption (Samsung specially dead UFS devices such as A326U, A136U).
- Fixed (===== wait for DA high speed port =====) device back to BRom port after switch to DA port.
- For MT6768 and MT6833P we only managed to find an online server based solution, and it requires BBK-Asia server for remote authentication, and the request cost so we were still trying to find offline solution hopefully we will succeed soon.
- The original preloader file will be saved into program directory (VIVO_EMI) with device RNID/ME_ID(unique MTK identificatior) so you can use it with flashing tools (EMI/Preloader) to initiate DRAM and boot device for R/W operations.
Next task as mentioned (offline solution for VIVO MT6768 - MT6833P) and Xiaomi Redmi 9A/9C Poco M31 Boot device/dram init fail solution.
To clarify the force/exit BootROM process, so developers can apply this type of ideas to the flashing tools to make it easier for users :
- we boot the device into DA mode with the singed Download Agent from VIVO, first we dump the original preloader to be used for DRAM setup later in future tasks and save it into local file with unquie device number such as (MEID - RNID - SoC HRID) then we format the primary boot region aka (BOOT1-A) to lead into USB exception due to missing or corrupted MAGIC header, now we will get bootrom port each time device connected to PC, and we have the original preloader file which saved earlier with the unique device ID, so we can use it for dram init, after finishing the desired operation, we just need to send the original BOOT region, the device will back to original status without downgrade or upgrade pre-loader file, and that’s.
Supported VIVO devices with MT6771 and MT6765 chipsets :
Vivo V11i
Vivo X21i
Vivo Z3i
Vivo Y97
Vivo Y01
Vivo Y02s
Vivo Y1s
Vivo Y3s
Vivo Y10
Vivo Y15a
Vivo Y15s
Vivo Y12s
Vivo Y16
Vivo Y20 2021
Vivo Y21
Vivo Y30
Vivo Y30 SE
- This software is provided 'as-is', without any express or implied warranty.
In no event will the authors be held liable for any damages arising from the use of this software.
- USE it at your own risk.
Password = mtk_meta_utility, credit to Mofadal El-Tayeb
MTK META Utility V52 :
- I noticed a lot of people strangling to unlock bootloader for this model (Redmi 6A (cactus)).
- Added Permanent Bootloader Unlock for Redmi 6A (cactus).
- Note : The Bootloader will be permanently unlocked after performing this operation, the reason is we enable eMMC permanent write protect flag to SECCFG area using the MTK CPU and SBrom Crypto driver to prevent BL re-lock after boot-up.
- We set a small check flag to ensure the device model is (Redmi 6A) the method is risky, so please try to operate with any different model code.
- Added eMMC/UFS health check from BootROM mode.
- The method uses DA setup handler to init the IC and dump
- life_time_est_a
- life_time_est_b
- pre_eol_info
- eMMC/UFS check statically implemented in the DA as well to detect HW faults, could work even in dead DRAM case
& please don't try to operate this method with non-original OEM devices such as Infinix/Tecno, the device might stuck at brom mode after health check and will need to disconnect battery to get brom mode working again.
- Added Dump and parse EXT_CSD registers via BootROM mode (implanted in eMMC/UFS health check function).
- Added Huawei Y9A FRL-L22 Force BRom mode from Upgrade Mode.
- Added Huawei Y9A FRL-L22 Exit BRom mode.
- Fixed VIVO New security (MT6768-MT6833P-MT6853) Read Info only from preloader mode.
$ - This software is provided 'as-is', without any express or implied warranty.
In no event will the authors be held liable for any damages arising from the use of this software.
- USE it at your own risk.
Password = mtk_meta_utility
MTK META Utility V51 :
- Added Samsung force/exit from for the following models :
- Samsung Galaxy Tab A7 Lite BIT 1 (UL2) :
SM-T225, SM-T220, SM-T225N (MediaTek MT8768T Helio P22T).
* Please don't try to operate this function for these types below :
- Devices with KG (Locked/Active).
- Devices with (sec CTRL status (0)).
- Devices which ends with DL TFN (Tracfone WS carrier)
- If your device isn't supported, just download suitable firmware and extract it with MTK META utility, then add the extracted preloader file into SAMEI folder.
- I guess you all know my next task.
$ - This software is provided 'as-is', without any express or implied warranty.
In no event will the authors be held liable for any damages arising from the use of this software.
MTK META Utility V50 :
I noticed some people corrupted UFS_LU0/EMMC_BOOT1 while trying to exit brom by other tools [They're writing preloader to offset 0x0 instead of (0x1000/0x800)] - WRONG, here is the solution to Exit BootROM for this type.
- Added ability to write (EMMC BOOT1/UFS LU0) via BootROM.
- If you tried to write it as memory using SPFT, you will get (status sec write data not allowed (0xC002000C), but now you can write it easily with MTK META Utility.
- Note, you can write LU1/BOOT2 instead of LU0/BOOT1, it's just a second copy of the preloader needed for this type of cases.
- Increased USB wait timeout to 400000 milliseconds (6.5 minutes).
$ - This software is provided 'as-is', without any express or implied warranty.
In no event will the authors be held liable for any damages arising from the use of this software.
For those who used MTK META Utility and performed Samsung Force BootROM operation :
- If your Samsung phone got bricked due to
(KG Locked/Active/Normal &
Sec CTRL Status (0) & Tracfone) while trying to force brom :
- This type of patching uses WatchDog & power controller and special SoC BIT registers, so :
- Don’t expect any type of Usb fix.
- The only solution is only via ISP - Direct eMMC.
- The solution is to read (BOOT1 in eMMC flash case or LU0 in UFS case).
- Open by HXD editor.
- The first char of the file is (F) - 46.
- If your device uses eMMC memory change the (F) to (E) - for UFS change (F) to (C) and write the file back to the IC, the (E) refers to (EMMC_BOOT) and the (C) refers to (COMBO_BOOT).
- Another solution is to read (BOOT2 in eMMC Flash case or LU1 in UFS case) and write it back to the IC , the readed BOOT2 to BOOT1 and LU2 write to LU0.
- Another solution is to read (boot1/lu0) from working phone with brom mode, then write it to the bricked device via ISP.
- The LU2 and BOOT1 are secondary backup copies of the preloader so it can be used as primary boot region as well.
- BOOT1 is the primary boot region (BOOT-A) in eMMC flash & BOOT2 is the secondary boot region (BOOT-B) in eMMC flash and
LU0 is the primary boot region (BOOT-A) in UFS flash &
LU1 is the secondary boot region (BOOT-B) in UFS flash.
- In MediaTek for eMMC (BOOT1) area content match the (BOOT2) area content &
For UFS (Samsung case Combo Boot mode is used) so the primary and secondary regions (LU0 & LU1) doesn’t match - the (BOOT-A) start with (COMBO_BOOT) and (BOOT-B) starts with (UFS_BOOT) if you write (LU2 to LU0) you might face dm-verity corruption, but can be easy fixed by write firmware.
- We have strongly warned to not operate this method for this type of secured devices , but people ignored the warnings and tried it anyway, always remember considering take the developers advice because they knows what the software supposed to do.
Thanks.
MTK META Utility V49 :
- Fix Samsung MTK force/exit BootROM without TP for :
Samsung Galaxy A32 4G (SM-A325M/SM-A325F) - with MT6768/69T - eMMC.
The issue caused by dm interface reset, the following message appears and prevent reboot for the second session to complete preloader patch process :
- (● Rebooting device...
Write error 5:{Access is denied},(send,mtk_ubl\mtkcommio.cpp,304))
Now fixed.
- Odin reboot command fixed (the reboot command structure require 2 cmds (init + end session and reset interface + reboot target + re-enable watchdog) now the software will skip reboot verification, since it’s not always needed.
- Samsung Enable ADB via MTP got some improvements as well.
* Please don't try to operate this function for these types below :
- Devices with KG (Locked/Active).
- Devices with ((sec ctrl status (0) - TFN (Tracfone))).
- Stay tuned for VIVO new security force brom and Demo disable for Dimensity 810, we’re working for it.
$ - This software is provided 'as-is', without any express or implied warranty.
In no event will the authors be held liable for any damages arising from the use of this software.
MTK META Utility V48 :
- Samsung MTK one click Force/Exit BootROM without test point.
- No Need to rebuild PMT or choose PIT/Preloader file, all operations are automated now.
- Tested with all Samsung devices with MTK based chipsets (MT6761) and newer.
- Preloader files now decrypted (plain) - developers can use in their tools.
- Fixed reboot from MTP to Download Mode.
- Removed the warning message - since we have checked and confirmed that the method is workable for all Samsung devices with MTK chipsets.
- Fixed (status_emi_setting_version_error).
- Fixed V45 bugs, please ignore the previous version and USE this one.
- Next TASK (KG Locked & VIVO New SEC force brom & VIVO Demo Remove for (MediaTek Dimensity 810) hopefully will succeed soon.
* Please don't try to operate this function for these types below :
- Devices with KG (Locked/Active).
- Devices with ((sec ctrl status (0) - TFN)).
- This software is provided 'as-is', without any express or implied warranty.
In no event will the authors be held liable for any damages arising from the use of this software.
- USE it at your own risk.
MTK META Utility V45 :
- Regarding Samsung MTK force BootROM without TP, now no need to select a preloader file to exit brom, the software will select the compatible preloader automatically.
- Renamed PIT files for PMT Rebuild operation with the same Model Number and BIT Rev.
- Next task is get rid of Rebuild PMT, but needs more work - in process.
- Tested with (A326U - A325M - SM-A326W - A326B - SM-M325F - A125F - A136U - A21 - A226B - A225M - A41 - F42) All bits.
* Please don't try this method with :
- Devices with KG (Locked/Active).
- Devices with (sec ctrl status (0)).
- Tracfone locked devices.
$ - This software is provided 'as-is', without any express or implied warranty.
In no event will the authors be held liable for any damages arising from the use of this software.
MTK META Utility V44 :
- Regarding Samsung MTK force BootROM without TP, now the device will boot to system normally without flashing.
- No need to flash any file via ODIN after exit brom just rebuild PMT using the readed PIT file.
- Rebuild PMT only needed UFS based devices, for eMMC devices exit brom option is enough.
- Tested on A32 5G (A326U - A326B > U3 - U7) & A12 U2.
- Now the software save logs into program directory for reports and Development support.
* Please don't try this method with :
- KG Locked devices.
- Devices with Sec Ctrl Status 0.
- Tracfone devices.
& The software is provided “as is”, without warranty of any kind, express or implied, including but not limited to the warranties of merchantability, fitness for a particular purpose and noninfringement, USE it at your own risk.